Filter
Top Products
9 - 1
9
Technical Specifications
Bluetooth Ring Scanner Module
Technical Specifications
Environmental Specifications
Bluetooth Radio
The CF Bluetooth Radio in the Bluetooth Ring Scanner is Bluetooth Special Interest Group (SIG) Qualified, is listed as an
EPL (End Product Listing) and with QDID: B011904.
Bluetooth Ring Scanner Battery Charger
Battery: Li-ion 3.7v 750mAh battery with a 500 charge/discharge life cycle
Electrical
Battery packs may leak up to 1mA current through the battery contacts when left in an unpowered battery charger charging
pocket.
I/O Port A 22 spring-pin, symmetrical port
Module Size Without Scanner : Height 0.75” / 1.90cm x Width 1.75” / 4.44cm x Length 2.4” / 6.1cm
With Scanner : Height 0.75” / 1.90cm x Width 1.75” / 4.44cm x Length 2.9” / 7.4cm
Module Weight 2.15oz / 60.9g with battery / 1.60oz / 45g without battery
4.05 – 4.15oz / 114g – 117g with battery and scanner
Ring Scanner : 1.75oz / 49.6g
Ring Imager : 1.85oz / 52.4g
Battery Li-Ion, 3.7v 750mAh with a 500 charge/discharge life cycle
Operating Temperature -4° F to 122° F (-20° C to +50° C)
Storage Temperature -40° F to 158° F (-40°C to +60°C)
Water and Dust
Resistance
Sealed to IP-54 specifications or better
Humidity 5% to 95% relative humidity, non-condensing
Corrosion Corrosion resistant when exposed to water and common cleaning chemicals
Chemical Resistance Corrosion resistant when exposed to water and common cleaning chemicals
Abrasion Resistance Housing resists normal abrasion from dirty hands.
Parameter Minimum Maximum Note
Power Supply Input Voltage (V AC-IN) 100 VAC 240VAC Auto-switching
Power Supply Input Frequency (freq) 47Hz 63Hz