Filter
Top Products
5 - 7
Decode Aiming Pattern
Note: This parameter only applies when in Decode Mode. See Operational Mode (page 5-11)
Note: Scan Enable Decode Aiming Pattern to project the aiming pattern during bar code capture, or Disable Decode Aiming
Pattern to turn the aiming pattern off.
Decoding Autoexposure
Select Enable Autoexposure to allow the imager to control gain settings and exposure (integration) time to best capture an
image for the selected operation mode.
Select Disable Autoexposure to manually adjust the gain and exposure time (not supported in this version). This option is
only recommended for advanced users with difficult image capture situations.
* Enable Decode Aiming Pattern
Disable Decode Aiming Pattern
* Enable Decoding Autoexposure
Disable Decoding Autoexposure