Honeywell 8650 Building Set User Manual


 
5 - 52
I 2 of 5 Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm,
either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council).
Set this parameter by scanning one of the bar codes shown below.
Transmit I 2 of 5 Check Digit
When enabled, the check digit is transmitted with the data.
Parameter setting for “I 2 of 5 Check Digit Verification” has no effect on this parameter value.
Set this parameter by scanning either of the bar codes shown below.
* Disable I 2 of 5 Check Digit Verification
USS (Uniform Symbology Specification)
OPCC (Optical Product Code Council)
Enable Transmit I 2 of 5 Check Digit
* Disable Transmit I 2 of 5 Check Digit