Filter
Top Products
4 - 62
Supplementals
Decode UPC/EAN Supplementals
Note: In order to minimize the risk of invalid data transmission, for best results select whether to read or ignore
supplemental characters.
Supplementals are additionally appended characters (2 or 5) according to specific code format conventions (e.g.,
UPC-A + 2).
Select an option by scanning one of the bar codes shown below.
Decode UPC/EAN with Supplementals
UPC/EAN symbols without supplemental
characters are not decoded.
* Ignore UPC/EAN with Supplementals
When a UPC/EAN plus supplemental symbol is
scanned, the UPC/EAN is decoded and the
supplemental characters ignored.
Autodiscriminate UPC/EAN Supplementals
When this option is selected you must assign a
value to the “Decode UPC/EAN Supplemental
Redundancy” parameter. A value of 5 or more is
recommended.
Enable 378/379 Supplemental Mode
The scanner will identify supplementals for EAN-
13 bar codes that start with a 378 or 379 prefix
only. All other UPC/EAN codes are decoded
immediately and the supplemental characters
ignored.
Enable 978/979 Supplemental Mode
If you select 978/979 Supplemental Mode and
are scanning Bookland EAN bar codes, see
Enable/Disable Bookland EAN to enable
Bookland EAN, and select a format using
Bookland ISBN Format.