Honeywell 8650 Building Set User Manual


 
5 - 53
Convert I 2 of 5 to EAN 13
A successful bar code conversion requires the following to be true:
Interleaved 2 of 5 scanning is enabled.
One of the I 2 of 5 lengths is set to 14.
The bar code has a leading zero.
The bar code has a valid EAN-13 check digit.
When enabled, the parameter converts a 14 character I 2 of 5 bar code into EAN-13 and transmits it to the host as EAN-13.
Set this parameter by scanning either of the bar codes shown below.
Discrete 2 of 5 (DTF)
When enabled, Discrete 2 of 5 (D 2 of 5) symbols will be scanned, decoded and transmitted.
Set this parameter by scanning either of the bar codes shown below.
Enable Convert I 2 of 5 to EAN-13
* Disable Convert I 2 of 5 to EAN-13
Enable Discrete 2 of 5
* Disable Discrete 2 of 5