Honeywell 8650 Building Set User Manual


 
5 - 79
Security Level
The decoder offers four levels of decode security for delta bar codes, which include the Code 128 family, UPC/EAN, and Code
93.
Select increasing levels of security for decreasing levels of bar code quality.
There is an inverse relationship between security and decoder aggressiveness, so choose only that level of security necessary
for any given application.
Select the security level appropriate for the bar code quality and then scan the appropriate Security Level bar code:
Security Level 0 This setting allows the decoder to operate in its most aggressive state, while providing sufficient
security in decoding most ?in-spec? bar codes.
Security Level 1 Select this option if misdecodes occur. This default setting should eliminate most misdecodes.
Security Level 2 Select this option if Security level 1 fails to eliminate misdecodes.
Security Level 3 If Security Level 2 was selected and misdecodes still occur, select this security level. Be advised,
selecting this option is an extreme measure against misdecoding severely out of spec bar codes.
Selecting this level of security significantly impairs the decoding ability of the decoder. If this level of
security is necessary, try to improve the quality of the bar codes.
Security Level 0
* Security Level 1
Security Level 2
Security Level 3