Filter
Top Products
A-9
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
78-13311-01
Appendix A Cabling Specifications
Attaching the 8-Port Interface Cable to a Bracket (Optional)
Step 2 You can align the molded RJ-45 ends of the cables in different ways by following either Step a or Step b.
a. Place the molded RJ-45 ends of the cables next to each other. This placement creates space between
the last molded RJ-45 end of the cable and the edge of the bracket adjacent to it. Route the cables
through this space. (See Figure A-8.)
Figure A-8 Routing Cables with Molded RJ-45 Ends of Cables Next to Each Other
35059