Filter
Top Products
4-7
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
78-13311-01
Chapter 4 T3 Dial Feature Card
Getting Help
Figure 4-12 Tighten the Captive Screws on the Cisco AS5400
Step 5
Check the card LEDs to verify that the card is working properly. For information about dial feature card
LEDs, refer to Chapter 6, “Troubleshooting”
Getting Help
For information about technical support, onsite service, and exchange and repair services, refer to the
“Obtaining Technical Assistance” section on page -xii in the “Preface.”
Where to Go Next
The remaining chapters of this guide include information on installing and troubleshooting DFCs and
creating cables.
• Chapter 5, “Universal Port Dial Feature Card.”
• Chapter 6, “Troubleshooting.”
• Appendix A, “Cabling Specifications.”
37170
Captive
screw
Captive
screw