Filter
Top Products
5-8
Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide
78-13311-01
Chapter 5 Universal Port Dial Feature Card
Online Insertion and Removal (OIR) of the Universal Port DFC
Step 4 Seat the DFC in the carrier by pushing the card firmly until the captive screws are aligned with their
holes.
Step 5 Tighten the screws to secure the DFC to the chassis. (See Figure 5-11 and Figure 5-12.)
Figure 5-11 Tighten the Captive Screws on the Cisco AS5350
Figure 5-12 Tighten the Captive Screws on the Cisco AS5400
Step 6
Check the card LEDs to verify that the card is working properly. For information about dial feature card
LEDs, refer to Chapter 6, “Troubleshooting”
36818
Carrier card
DFC
Chassis
Captive
screw
Captive
screw
37202
Captive
screw
Captive
screw