Filter
Top Products
Configuring the Back-end Servers 55
Configuring the
Back-end Servers
This section provides information on how to add and delete accounting
servers, authentication servers, directory servers, and VCX data servers.
In VCX 6.0, the authentication and directory servers were combined to
become the VCX data server.
Adding Accounting
Servers
To add an accounting server through EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Accounting Servers.
4 Click Add.
The Add row to table window appears.
5 Fill in the fields according to the descriptions in Table 24
.
6 Click OK.
7 The accounting server is added to the Accounting Server tab.
Editing Accounting
Server IP Addresses
To edit an accounting server IP address for the Call Processor using EMS:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com Sip Call Processor.
3 From the Properties tab, click Accounting Servers.
4 Double-click the IP Address under the AcctServerIpAddress column you
want to edit.
Table 24 Accounting Server Tab Descriptions in EMS
Attribute Description Values
Priority Specifies the priority of the
accounting server.
Integer: 1 - 5
1 = primary)
2 = secondary
AcctServerIpAddress Specifies the IP Address of the
accounting server.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)
LocalIpAddress Specifies the Local IP Address
for the accounting server
client.
IP Address String
xxx.xxx.xxx.xxx (0 - 255)