Filter
Top Products
Upgrading Software 131
Upgrading
Software
This section describes how to upgrade software files on a media gateway.
The software upgrade files are provided by 3Com or your authorized 3Com
reseller and must be installed using the following sequence of steps.
CAUTION: Upgrading software files on a gateway may cause the
gateway to reboot. Perform an upgrade in a service window only.
1 The software to be upgraded MUST be located in the
<EMS_INSTALL_DIR>/software_upgrades/voice/GatewayUpgrades
directory on the EMS server.
There are several types of software upgrade files. Each upgrade file must
be placed in the above directory on the EMS server.
2 Once the upgrade file is in the correct directory, from the Explorer tab,
right-click on the media gateway.
3 From the right-hand pane, click the Planned Upgrades tab.
A field appears for each software upgrade file you have copied to the
GatewayUpgrades directory. The following figure shows the Planned
Upgrades tab with a field for upgrading a CMP file.
Figure 5 Planned Upgrades Tab