Filter
Top Products
1
3COM VCX IP TELEPHONY
SERVER
This chapter describes how to install a license on a VCX IP Telephony
Server, and view and configure the features that are associated with the
VCX IP Telephony Server.
Installing a License
on a VCX Server
In VCX 7.0 and later, you must install a license to use the VCX IP
Telephony Server.
The license file must be installed after you complete the network
configuration and service configuration (that is, after you have run the
vcx-config-network and setup scripts).
Installing a license involves the following steps:
1 Obtain the license file.
2 Copy the license file to the EMS server.
3 Upload the license file.
4 Activate the license file.
Obtaining a License To obtain a license file, contact your authorized 3Com representative.
When you request a license file, submit the machine ID for your VCX IP
Telephony Server. This machine ID is available from the command line
vcx-showmachineid or from the License Info tab in EMS.