Filter
Top Products
Upgrading VCX Server Software from 7.0 to 7.1 103
b In the menu that appears, click Transfer Upgrade Images, and then
Transfer IPMS Upgrade File.
In the Job Progress area of the window, progress messages appear in
the Task Name and Task Status columns. The icon on the left initially
appears yellow. After a few seconds, the icon turns green and the Task
Status column shows that the file transfer was successful.
8 Install the upgrade software on the VCX server.
a Right-click the server name (3Com VCX IP Telephony
Server<hostname>) in the left pane of the EMS client window.
You must wait for a few seconds for the menu to appear.
b In the menu that appears, click Install Upgrade Images, and then
Install IPMS Upgrade.
In the Job Progress area of the window, progress messages appear in
the Task Name and Task Status columns. The icon on the left initially
appears yellow. After a few seconds, the icon turns green and the Task
Status column shows that the upgrade was successful.
Installing SIP Phone
Downloader and
Boot File Software
Patch Releases
This section describes how to install SIP Phone Downloader and Boot File
software patch release files. These instructions are specifically for a patch
release, not a system upgrade.
There are two possible phone-only software upgrades: Application
Downloader software (PhoneApp) and Boot software (PhoneBoot).
Depending on the VCX system configuration, the procedures are
performed on one of these servers:
■ IP Telephony and Messaging server (All in One server)
■ IP Telephony server (Soft Switch server)
■ Call Processing server (Call server)
PhoneApp Upgrade
Follow the procedures in this section to upgrade the PhoneApp software.
1 The software patch release upgrade file MUST be located in the
<EMS_INSTALL_DIR>/software_upgrades/voice/PhoneAppUpgrades
directory on the EMS server.
2 Once the file is in the correct directory, from the EMS client explorer tree,
click 3Com IP Telephony Server <hostname>.
3 Click the Planned Upgrades tab in the right pane.