Filter
Top Products
RAID Monitoring 33
RAID Monitoring EMS provides a method for viewing RAID partitions and Active Drives.
To view RAID partitions:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click RAID Partitions.
To view RAID active drives:
1 Log into EMS.
2 From the Explorer tab, navigate to the 3Com VCX IP Telephony Server.
3 From the Properties tab, click RAID Active Drives.
UPS Monitoring EMS allows you to remotely set up UPS master/slaves. Additionally, if UPS
monitoring is enabled, EMS displays monitoring data and data on UPS
slaves.
Setting Up UPS
Master/Slaves
To set up UPS master/slaves:
1 Log into EMS.
2 From the Explorer tab, right-click 3Com VCX IP Telephony Server.
3 From the pop-up menu, select UPS Monitoring and then select Setup as
Master or Setup as Slave.
Enabling UPS
Monitoring
To enable or disable UPS monitoring:
1 Log into EMS.
2 From the Explorer tab, right-click 3Com VCX IP Telephony Server.
3 Configure the information for the slave.
■ For Master Slave configuration, complete the information as described
Table 7
.
■ For Slave configuration, complete the information as described in
Table 8
.
For complete details of each attribute, view the context-sensitive help for
each attribute in EMS.