7 - 15
– +
ELEC
STARTER MOTOR
5. Measure:
• brush length
Out of specification → Replace the brushes
as a set.
6. Measure:
• brush spring force
Out of specification → Replace the brush
springs as a set.
7. Check:
• gear teeth
Damage/wear → Replace the gear.
8. Check:
• bearing
• oil seal
• O-rings
Damage/wear → Replace the defective
part(s).
Brush length wear limit
3.5 mm (0.14 in)
Brush spring force
1.0~ 3.0 N
(102 ~ 306 gf, 3.60 ~ 10.80 oz)
EBS00515
ASSEMBLING THE STARTER MOTOR
1. Install:
• bracket
• brush
• armature coil
• yoke
a
a