Filter
Top Products
6 - 31
CHAS
STEERING SYSTEM
EBS00449
INSTALLING THE HANDLEBAR
1. Install:
• handlebar
• upper handlebar holders
TIP
• Install the handlebar, please align the punch
mark and the gap at handlebar holder .
• The upper handlebar holders should be
installed with the flange forward .
NOTICE
_
First tighten the bolt on the rear side of
the handlebar holder, and then tighten the
bolt on the front side.
T
R
.
.
14 Nm (1.4 m · kg, 10.1 ft · lb)
EBS00450
INSTALLING THE HANDLEBAR GRIPS
1. Install:
• handlebar grips
TIP
• Before installing the handlebar grips, tempo-
rarily install the rear brake lever and front
brake lever assembly on the handlebar.
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface with a
lacquer thinner.
4
5
6
3
1
2
5
6
3
4
1
2