Filter
Top Products
1 - 5
GEN
INFO
SPECIAL TOOLS
EBS00021
SPECIAL TOOLS
The following special tools are necessary for complete and accurate tune-up and assembly. Use
only the appropriate special tools; this will help prevent damage caused by the use of inappropriate
tools or improvised techniques. Special tools may differ by shape and part number from country to
country. In such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
For US and CDN
P/N. YM-, YU-, YS-, YK-, ACC-
Except for US and CDN
P/N. 90890-
Bolt
90890-04158
YM-04158
Weight
90890-01084
Set
YU-01083-A
Slide hammer bolt (M5)/weight/set
These tools are used to remove the rocker
arm shaft.
90890-01189
YM-01189
Flywheel puller
This tool is needed to remove the rotor.
90890-01304
YU-01304
Piston pin puller set
This tool is used to remove the piston pin.
90890-01311
YM-08035
Tappet adjusting tool (3 mm)
This tool is necessary for adjusting the
valve clearance.
90890-01312
YM-01312-A
Fuel level gauge
This gauge is used to measure the fuel
level in the float chamber.
90890-01701
YS-01880-A
Sheave holder
90890-01268
YU-01268
Ring nut wrench
Spanner wrench
This tool is needed to hold the rotor when
removing or installing the rotor nut.
This tool is used to adjusting the front and
rear shock absorbers.
Tool No. Tool name/Function Illustration