Filter
Top Products
6 - 36
CHAS
STEERING SYSTEM
INSTALLING THE STEERING STEM
1. Tighten:
• steering stem nut
• tie-rod end nut
TIP
When tightening each tie-rod end nut , hold
the tie-rod ball joint with a 14-mm wrench .
T
R
.
.
55 Nm (5.5 m • kg, 39.8 ft • Ib)
T
R
.
.
35 Nm (3.5 m • kg, 25.3 ft • Ib)
TIP
The lower handlebar holder and steering stem
should be set a right angle when assembling.
EBS00459
INSTALLING THE LOCK WASHER
1. Install:
• lock washer
• bolts
2. Bend the lock washer tab along a flat side
of the bolt.
T
R
.
.
25 Nm (2.5 m • kg, 18.1 ft • Ib)
1. Install:
• lower handlebar holder
• nuts
T
R
.
.
35 Nm (3.5 m • kg, 25.3 ft • Ib)
INSTALLING THE LOWER HANDLEBAR
HOLDER
1
2