Filter
Top Products
6 - 32
CHAS
STEERING SYSTEM
EBS00451
INSTALLING THE REAR BRAKE MASTER
CYLINDER
1. Install:
• handlebar switch
TIP
• Installing the rear brake master cylinder, make
sure the handlebar switch , handlebar grip
, and brake master cylinder are in the
positions shown in the illustration.
EBS00452
INSTALLING THE FRONT BRAKE LEVER
ASSEMBLY
1. Install:
• front brake lever assembly
TIP
• Installing the front brake lever assembly, make
sure the clearance the front brake lever
assembly and handlebar grip .
2. Adjust:
• front brake
Refer to “ADJUSTING THE FRONT
BRAKE” in chapter 3.
65 ~ 66 mm (2.56 ~ 2.60 in)
• brake master cylinder
Install the brake master cylinder, please align
the punch mark and the gap at brake
master cylinder holder .
•
5
3
4
1
2
4
5
The “UP” mark on the brake master cylinder
bracket should face up.
•
•
Brake master cylinder bracket
14 Nm (1.4 m•kg, 10.1 ft•lb)
• handlebar grip
• handlebar grip
1
2
Install the front brake lever assembly, please
align the punch mark and the gap at
front brake lever assembly .
•
4
3
4