6 - 9
CHAS
FRONT BRAKES
2. Check:
• brake drum inner surface
Oil/scratches → Remove.
EBS00442
INSTALLING THE FRONT BRAKES
The following procedure applies to both of the
front brakes.
Reverse the “Removal” procedure.
Note the following points.
1. Lubricate:
• brake camshaft
• pivot pin
NOTICE
_
During installation, lightly grease the brake
camshaft and the pivot pin. Wipe off the
excess grease.
2. Install:
• brake camshaft
• brake camshaft lever
TIP
• Install the brake camshaft so its punch mark
is positioned as shown.
• Align the punch mark in the brake camshaft
with the mark on the brake camshaft lever.
Left side
Right side
Oil
Use a rag soaked in
lacquer thinner or
solvent.
Scratches
Use an emery cloth (light
and even polishing).
Lithium-soap-based grease
T
R
.
.
14 Nm (1.4 m · kg, 10.1 ft · lb)
a
A
B
A
B
a
a
• brake camshaft spring