Filter
Top Products
7 - 12
– +
ELEC
ELECTRIC STARTING SYSTEM
EBS01054
YES
NO
EBS01041
YES
NO
EBS01046
YES
NO
EBS01057
YES
NO
4. Starter relay
• Disconnect the starter relay coupler from
the coupler.
• Connect the pocket tester (
Ω ×
1) and bat-
tery (12 V) to the starter relay coupler as
shown.
Positive battery terminal → red/white
Negative battery terminal
→
Green/Yellow
Positive tester probe → red
Negative tester probe → red
• Does the starter relay have continuity
between red and black?
Replace the starter
relay.
5. Main switch
• Check the main switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the main switch OK?
Replace the main
switch.
G/Y
R/W
R
R
6. Rear brake switch
• Check the rear brake switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the rear brake switch OK?
Replace the rear
brake switch.
7. Start switch
• Check the start switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the start switch OK?
Replace the handle-
bar switch.
1
1
2
2
3
3
4
4
EBS01059
YES
NO
8.Wiring
• Check the entire starting system’s wiring.
Refer to “CIRCUIT DIAGRAM”.
• Is the starting system’s wiring properly
connected and without defects?
The starting system
circuit is OK.
Properly connect or
repair the starting
system’s wiring.