Filter
Top Products
4 - 29
ENG
C.D.I. MAGNETO
REMOVING THE C.D.I. MAGNETO ROTOR
1. Remove:
nut
plate washer
TIP
While holding the C.D.I. magneto rotor with
the holding tool , loosen the C.D.I. mag-
neto nut .
Do not allow the sheave holder to touch the
projection on the C.D.I. magneto rotor.
Rotor holding tool
90890-01235 (YU-01235)
2. Remove:
C.D.I. magneto rotor
(with flywheel puller )
Flywheel puller
90890-01189 (YM-01189)
1
1
1
1
2
2
2
2
1
EBS00259
EBS00262
CHECKING THE PICKUP COIL/STATOR
ASSEMBLY
1. Check:
• pickup coil/stator assembly
Damage
→
Replace.