Filter
Top Products
24-Pump, 128-Station Controller Chapter 3: Installation 47
To copy the selected pump’s settings to one other pump
1. Touch the gray Copy to Pump button next to the green Copy To Single
Pump button.
The keypad pops up.
2. Enter the pump number for the pump you are copying to. Use ← to erase any
mistakes. Use ↵ to enter the value.
The keypad disappears and the Pump Copy screen shows the pump number you
entered under Copy to Pump.
3. Touch the green Copy To Single Pump button.
“Copy Complete” briefly appears at the top of the screen.
4. As appropriate, either continue copying to other pumps, or touch Pump Setup to
go back to the Pump n Setup screen.
To copy the selected pump’s settings to a range of other pumps
1. Touch First Pump next to the green button labeled Copy To Range of
Pumps button.
The keypad pops up.
2. Enter the number for the pump at the lower end of the range you are copying to. Use
← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Pump Copy screen shows the pump number you
entered under First Pump.
3. Touch Last Pump next to the light grey button labeled First Pump.
The keypad pops up.
4. Enter the number for the pump at the upper end of the range you are copying to. Use
← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Pump Copy screen shows the pump number you
entered under Last Pump.
5. Touch the green Copy button labeled Copy To Range of Pumps.
“Copy Complete” briefly appears at the top of the screen.
6. As appropriate, either continue copying to other pumps, or touch Pump Setup to
go back to the Pump n Setup screen.
To copy the current pump’s settings to all other pumps
1. Touch the green Copy To All Pumps button.
“Copy Complete” briefly appears at the top of the screen.
2. Touch Pump Setup to go back to the Pump n Setup screen.