Filter
Top Products
24-Pump, 128-Station Controller Chapter 3: Installation 42
3. Touching Help in the lower right of this screen gives you a menu of online help for
the choices in this screen.
4. Adjust settings as required. Touching any box that appears in red (for “disabled”)
toggles it to green (for “enabled”). Many boxes have more than one embedded state.
Touching any box that appears in light gray gives you a keypad to enter a new value.
Keypad entry works as with many ATM machines: the first digit you enter initially
appears in the rightmost column and moves to the left as you enter more digits. Use
← to erase any mistakes. Use ↵ to enter the value. The keypad disappears and the
Station n Setup screen shows the new value in the selected gray box.
Touching Reset To Defaults in the lower right of the screen changes all
settings for this station back to their factory defaults.
See pp. 64–68 for details on the options and their default settings.
4. As appropriate:
a. Copy this station’s settings to one or more other stations, as described below
- or -
b. Touch Back ◄ to go to the Station n-1 Setup screen
- or -
c. Touch Next ► to go to the Station n+1 Setup screen
- or -
d. Touch Goto and enter a station number to go to that station’s setup screen
5. To save or restore settings, go to the System Setup screen and touch
Save/Restore on the right side of the screen.
Naming Stations
To name a station, go to the Station Status screen. Touch the icon for the station you
want to name and hold it for several seconds.
The Station n Operator Settings screen for the selected station appears.
Touch Station Setup at the Station n Operator Settings screen.
The Station n Setup screen appears.
1. Press Name Line 1 at the bottom of the Station n Setup screen.
A keypad will pop up.