Filter
Top Products
8
3.2.4 Wiring of the motor connection terminals U, V, W................... 3-4
3.2.5 Wiring of the ground terminals
.......................................... 3-4
3.2.6 Wiring of the DC reactor connection terminals P/+, P1 ........... 3-5
3.2.7 Wiring of the brake resistor connection terminals P/+, PR ...... 3-5
3.2.8 Wiring of the DC terminals P/+, N/- ......................................... 3-5
3.3 Wiring of the Control Circuit Terminals 3-6
3.3.1 Terminals................................................................................. 3-6
3.3.2 Terminal layout and connection specifications ........................ 3-9
3.3.3 Wiring of the contact input terminals ......................................3-10
3.3.4 Wiring of the speed command input terminals .......................3-11
3.3.5 Wiring of the transistor output terminals .................................3-11
3.3.6 Wiring of the contact output terminals ....................................3-12
3.3.7 Wiring of the instrument connection terminals........................3-12
3.4 Wiring of the PU Connector 3-13
3.4.1 Pin layout................................................................................3-13
3.4.2 Using the cable to connect the parameter unit.......................3-13
3.4.3 System configuration examples
for communication operations................................................3-13
3.4.4 Wiring methods for communication operation ........................3-15
4. HOW TO USE
THE FR-PU04 PARAMETER UNIT 4-1
5. OPERATION 5-1
5.1 Power On 5-1
5.2 Setting of Operation Mode 5-1
5.3 Starting operation 5-2
6. TROUBLESHOOTING 6-1
6.1 Message Appearing on the Parameter Unit 6-1
6.1.1 Protective function activated.................................................... 6-1
6.1.2 Alarm function activated.......................................................... 6-4
6.1.3 Others...................................................................................... 6-5
6.2 Motor operation out of ordinary 6-6