Filter
Top Products
8 PARAMETER FUNCTIONS
8-6
8.5 Setting of the Operation Pattern
8.5.1 Running speed region
Pr. 1 "maximum speed"
Pr. 2 "minimum speed"
Pr. Setting Range Unit Operation
1 0 to 7200 r/min
If the speed command entered is more than the maximum
speed set in Pr. 1, the running speed is clamped at the
maximum speed.
2 0 to 7200 r/min
If the speed command entered is less than the minimum
speed set in Pr. 2, the running speed will not fall below the
minimum speed.
If the speed command is not input, turning "ON" the start
signal will start operation at the minimum speed.
5,10V
Pr.1
Pr.2
Motor speed
Speed command value
0