Renesas R5S72627 Doll User Manual


  Open as PDF
of 2152
 
Section 17 I
2
C Bus Interface 3
Page 860 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
17.3.4 I
2
C Bus Interrupt Enable Register (ICIER)
ICIER is an 8-bit readable/writable register that enables or disables interrupt sources and
acknowledge bits, sets acknowledge bits to be transferred, and confirms acknowledge bits
received.
76543210
00000000
R/W R/W R/W R/W R/W R/W R R/W
Bit:
Initial value:
R/W:
TIE TEIE RIE NAKIE STIE ACKE ACKBR ACKBT
Bit Bit Name
Initial
Value R/W Description
7 TIE 0 R/W Transmit Interrupt Enable
When the TDRE bit in ICSR is set to 1 or 0, this bit
enables or disables the transmit data empty interrupt
(TXI).
0: Transmit data empty interrupt request (TXI) is
disabled.
1: Transmit data empty interrupt request (TXI) is
enabled.
6 TEIE 0 R/W Transmit End Interrupt Enable
Enables or disables the transmit end interrupt (TEI) at
the rising of the ninth clock while the TDRE bit in ICSR
is 1. TEI can be canceled by clearing the TEND bit or
the TEIE bit to 0.
0: Transmit end interrupt request (TEI) is disabled.
1: Transmit end interrupt request (TEI) is enabled.
5 RIE 0 R/W Receive Interrupt Enable
Enables or disables the receive data full interrupt (RXI)
when receive data is transferred from ICDRS to ICDRR
while RDRF in ICSR is set to 1. RXI can be canceled by
clearing the RDRF or RIE bit to 0.
0: Receive data full interrupt request (RXI) are disabled.
1: Receive data full interrupt request (RXI) are enabled.