Filter
Top Products
9 - 4 9 - 4
MELSOFT
9. SETTING OF POSITIONING DATA AND START BLOCK DATA
9.2 Positioning Data Checking
Check the positioning data, start block data and parameter settings for errors.
Also, since operation can be checked virtually by the offline simulation of the
positioning data, debugging efficiency improves. (Refer to Section 9.2.2.)
9.2.1 Error check
PURPOSE
Make error check to check the parameter settings, positioning data and start block
data for mismatches and setting omissions.
For the error check range, refer to the AD75 user’s manual.
BASIC OPERATION
5. Choose any of the edit mode items.
Double-click any of the items.
Doble-click.
2. Click the [Tools] → [Error check] menu.
DISPLAY/SETTING SCREEN