Filter
Top Products
11 - 5 11 - 5
MELSOFT
11. POSITIONING DEBUGGING
DISPLAY/SETTING DATA
Item Description
Address
Indicates the feed address.
Buffer memory address (Axis #1): 800
Axis speed
Indicates the feed speed.
Buffer memory address (Axis #1): 812
Axis status
Indicates the axis status.
Buffer memory address (Axis #1): 809
No.
Indicates the positioning data No. in execution.
Note that if other than the positioning data No. is specified for operation, its starting number
is displayed.
Buffer memory address (Axis #1): 835
Pattern
Indicates the positioning data pattern in execution.
Buffer memory address (Axis #1): 838
Control method
Indicates the positioning data control method in execution.
Buffer memory address (Axis #1): 838
Acc.
Dec.
Indicates the acceleration and deceleration times selected in the positioning data in
execution.
Set the acceleration and deceleration times in basic parameters 2 and extended parameters
2.
For parameter setting, refer to Section 8.1.
Buffer memory address (Axis #1): 838
Error
Warning
Shows the error and warning codes when an error and warning has occurred.
0 is displayed when no error/warning has occurred.
The error/warning codes can be confirmed in [Help].
Buffer memory address (Axis #1): 807, 808
M code
Indicates the M code of the positioning data in execution.
Buffer memory address (Axis #1): 806
Axis #2
Axis #3
Shows the operation monitor data of axis #2/#3.
"History" button
"I/O Signal" button
"Operation" button
"Servo" button
Click the corresponding button to display the history, signal, operation or servo monitor dialog
box.
Refer to Section 11.1.3 for history monitor.
Refer to Section 11.1.4 for signal monitor.
Refer to Section 11.1.5 for operation monitor.
Refer to Section 11.1.6 for servo monitor.
"Comment disp." button
Click this button to display the dialog box which shows the positioning data comment and M
code comment in execution.
"Comment display"
dialog box
Shows the positioning data comment and M code comment in execution.