Mitsubishi Electronics AD75M1/M2/M3 Model Vehicle User Manual


 
12 - 11 12 - 11
MELSOFT
12. USEFUL FUNCTIONS
12.2.4 Initializing the data
PURPOS
E
Using the data initializing function, initialize the positioning data, start block data
(including condition data and indirect data), parameters and servo parameters set
to the project axis-by-axis.
Note that the data of the project saved are not initialized.
BASIC OPERATIO
N
1. Display any of the positioning data (refer to Section 9.1), start block data (refer
to Section 9.3), parameters (refer to Section 8.1) and servo parameters (refer
to Section 8.2) on the main screen.
2. Click the [Tools] [Initialize data] menu.
3. Set the types and axis of the data to be initialized in the Data Init dialog box.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Positioning data Set the axis of the positioning data to be initialized.
Start block data Set the axis of the start block data to be initialized.
Parameter Set the axis of the parameters to be initialized.
Servo parameter
Set the axis of the servo parameters to be initialized.
This is not displayed when other than AD75M# is selected in Change AD75 model.
"OK" button Click this button to initialize the data.