Filter
Top Products
12 - 1 12 - 1
MELSOFT
12. USEFUL FUNCTIONS
12. USEFUL FUNCTIONS
Out of the functions that can be performed on GX Configurator-AP, this chapter
describes the functions and operations useful for project execution, positioning data
setting, etc. and the functions which support settings.
This chapter also explains the teaching function which measures positioning
addresses, the function which prints project setting data, and the trace function which
displays operation results as waveform/track data.
12.1 Useful Functions for Project Execution
This section describes the functions and operations which are helpful for utilizing
project data to create a project and for changing set data.
12.1.1 Verifying the project data
PURPOS
E
Compare and verify the parameters, servo parameters, positioning data, M code
comments, start block data and condition data of the currently open project and
the saved project.
BASIC OPERATIO
N
1. Place the main screen in the icon display status.
2. Click the [Project] → [Verify Project] menu.
3. Choose the verify destination project in the Verify Project dialog box and click
the "Verify" button.
4. Set the types and ranges of the data to be verified in the Verify dialog box.
5. Check the results in the Verify result dialog box.
DISPLAY/SETTING SCREEN
12