Filter
Top Products
9 - 13
– +
ELEC
IGNITION SYSTEM
C0NTINUITY
CORRECT
8.Main switch
Refer to “CHECKING THE SWITCHES”.
*
INCORRECT
Replace the main switch.
9.Pickup coil resistance
●
Disconnect the AC magneto coupler from
the wire harness.
●
Connect the pocket tester (Ω × 100) to the
pickup coil terminals.
Tester (+) lead
→
White/Red terminal
1
Tester (–) lead
→
White/Green terminal
2
MEETS
SPECIFICATION
●
Check the pickup coil for the specified
resistance.
Pickup coil resistance:
459 ~ 561
Ω
at 20 °C (68 °F)
(White/Red – White/Green)
OUT OF SPECIFICATION
Replace the pickup coil/stator assembly.
10.Charging/rotor rotation direction detection
coil resistance
●
Disconnect the AC magneto coupler from
the wire harness.
●
Connect the pocket tester (Ω × 100) to the
charging/rotor rotation direction detection
coil terminal.
Tester (+) lead
→
Red terminal
1
Tester (–) lead
→
White/Blue terminal
2
MEETS
SPECIFICATION
●
Check the charging/rotor rotation direction
detection coil for the specified resistance.
Rotor rotation direction sensing
coil resistance:
0.085 ~ 0.105
Ω
at 20 °C (68 °F)
(Red – White/Blue)
*
OUT OF SPECIFICATION
Replace the pickup coil/stator assembly.