Yamaha LIT-11616-16-02 Model Vehicle User Manual


 
7 - 13
DRIV
FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR
Adjusting differential gear lash
1.Remove:
Shim(s) (left) 1
Differential gear assembly 2
Shim(s) (right) 3
2.Adjust:
Gear lash
*****************************************************
Adjustment steps:
Select the suitable shims using the following
chart.
If it is necessary to increase by more than
0.05 mm (0.002 in):
Reduce right shim thickness by 0.1 mm
(0.004 in) for every 0.1 mm (0.004 in) of left
shim increase.
If it is necessary to reduce by more than
0.1 mm (0.004 in):
Increase right shim thickness by 0.1 mm
(0.004 in) for every 0.1 mm of left shim
decrease.
* Right only
*****************************************************
Too little gear lash
Reduce shim
thickness.
Too large gear lash
Increase shim
thickness.
Ring gear shim (left and right)
Thickness (mm)
0.1 0.2 0.3
0.4 0.5 1.0
1.5 2.0* 2.5*