Yamaha LIT-11616-16-02 Model Vehicle User Manual


 
3 - 42
CHK
ADJ
BLEEDING THE HYDRAULIC BRAKE SYSTEM/
ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT ROD
WARNING
Check the operation of the brake after
bleeding the brake system.
*****************************************************
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
1
NEUTRAL
2
FORWARD
3
REVERSE
4
Control cable
5
Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its closed position.
Otherwise the transmission may be
damaged.
1.Adjust:
Rear brake pedal free play
Refer to ADJUSTING THE REAR BRAKE.
2.Adjust:
Select lever control cable
Select lever shift rod
*****************************************************
Adjustment steps:
Control cable:
Remove the rear brake light switch cover
1
.
Make sure the select lever is in NEUTRAL.
Adjust the control cable so there is zero free
play in the cable. When the adjustment is
correct, slack in the return spring
2
will be
taken up.
N
OTE:
In some cases it will be necessary to further
adjust the cable with the locknuts
3
arrangement that holds the cable to its mount.