Yamaha LIT-11616-16-02 Model Vehicle User Manual


 
9 - 12
+
ELEC
IGNITION SYSTEM
C0NTINUITY
6.Ignition coil resistance
Disconnect the ignition coil connector from
the wire harness.
Connect the pocket tester ( × 1) to the
ignition coil.
Tester (+) lead
Orange lead terminal
Tester () lead
Ignition coil base
Check that the primary coil has the
specified resistance.
Primary coil resistance:
0.18 ~ 0.28
at 20 °C (68 °F)
*
OUT OF SPECIFICATION
Replace the ignition coil.
BOTH MEET
SPECIFICATION
Connect the pocket tester ( × 1k) to the
ignition coil.
Tester (+) lead
Orange lead terminal
Tester () lead
Spark plug lead
Check that the secondary coil has the
specified resistance.
Secondary coil resistance:
6.32 ~ 9.48 k
at 20 °C (68 °F)
CORRECT
7.Engine stop switch
Refer to CHECKING THE SWITCHES.
*
INCORRECT
Replace the handlebar switch (left).