Filter
Top Products
4 - 14
ENG
CYLINDER HEAD
N
OTE:
Be sure the “I” mark 5 on the camshaft
sprocket is aligned with the match mark 2 on
the cylinder head.
●
Force the camshaft clockwise and
counterclockwise to remove timing chain slack.
●
Insert a screwdriver into the timing chain
tensioner hole and push the timing chain
guide inward.
●
While pushing the timing chain guide, be sure
that the camshaft sprocket “I” mark 5 is
aligned with the cylinder head match mark 2.
●
If the marks are aligned, tighten the camshaft
sprocket bolt. If the marks are not aligned,
change the meshing position of the camshaft
sprocket and timing chain.
*****************************************************
3.Install:
●
Timing chain tensioner
*****************************************************
Installation steps:
●
Remove the tensioner cap bolt 1, washer 2
and spring 3.
●
Release the timing chain tensioner one-way
cam 4 and push the tensioner rod 5 all the
way in.
●
Install the tensioner 6 with a new gasket into
the cylinder.
WARNING
Always use a new gasket.
●
Install the spring, washer and cap bolt.
*****************************************************
T
R
.
.
Bolts (timing chain tensioner):
11 Nm (1.1 m • kg, 8.0 ft • lb)
T
R
.
.
Cap bolt (timing chain tensioner):
23 Nm (2.3 m • kg, 17 ft • lb)