Yamaha LIT-11616-16-02 Model Vehicle User Manual


 
9 - 21
+
ELEC
ELECTRIC STARTING SYSTEM
5.Measure:
Brush length a (each)
Out of specification Replace the brush
holder set.
Brush length:
12.5 mm (0.49 in)
<Wear limit:>
5 mm (0.20 in)
6.Measure:
Brush spring force
Fatigue/out of specification Replace the
brush holder set.
Brush spring force:
7.65 ~ 10.01 Nm
(780 ~ 1,020 g, 27.54 ~ 36.03 oz)
7.Check:
O-rings
Wear/damage Replace.
ASSEMBLING THE STARTER MOTOR
1.Install:
Brush holder set 1
N
OTE:
Align the projection a on the brush seat 1 with
the slot b on the yoke.
2.Install:
Yoke
Brackets
N
OTE:
Align the match marks a on the yoke with the
match marks b on the brackets.