Filter
Top Products
4 - 54
ENG
CLUTCH
2.Check:
●
Clutch shoe
Heat damage → Replace.
3.Measure:
●
Clutch shoe thickness
Out of specification → Replace.
Clutch shoe thickness:
1.5 mm (0.06 in)
Clutch shoe wear limit
a
:
1.0 mm (0.04 in)
INSTALLING THE CLUTCH
1.Install:
●
Clutch carrier assembly
●
Nut 1
N
OTE:
●
Lubricate the nut with molybdenum disulfide
oil.
●
Use a clutch holding tool 2 to hold the clutch
carrier assembly.
2.Lock the threads with a drift punch.
Clutch holding tool:
P/N. YM-91042, 90890-04086
New
T
R
.
.
140 Nm (14.0 m • kg, 100 ft • lb)
3.Install:
●
One-way clutch bearing
N
OTE:
The one-way clutch bearing should be
installed in the clutch carrier assembly with the
arrow mark a facing toward the clutch
housing.