Filter
Top Products
4 - 72
ENG
TRANSMISSION
CHECKING THE SHIFT FORKS
1.Check:
●
Shift fork cam follower 1
●
Shift fork pawls 2
Scoring/bends/wear/damage → Replace.
2.Check:
●
Guide bar
Roll the guide bar on a flat surface.
Bends → Replace.
WARNING
Do not attempt to straighten a bent guide
bar.
3.Check:
●
Shift fork movement
(on the guide bar)
Unsmooth operation → Replace the shift fork
and the guide bar.
CHECKING THE SHIFT CAM
1.Check:
●
Shift cam groove
Scratches/wear/damage → Replace.
CHECKING THE TRANSMISSION
1.Measure:
●
Axle runout
Use a centering device and a dial gauge.
Out of specification → Replace the bent axle.
Runout limit (drive axle):
0.06 mm (0.0024 in)