Filter
Top Products
8 - 37
CHAS
STEERING SYSTEM
●
Install the body 3, short bolt 5, remover
washer 6 and remover spacer 7 onto ball
joint.
N
OTE:
●
Remover washer 6 must be aligned with the
projection on the head of the ball joint.
●
Surface a of the remover spacer 7 must be
aligned with surface b of the steering
knuckle.
●
Hold the body 3 in place while turning in the
short bolt 5 to remove the ball joint A from
the steering knuckle.
●
Remove the ball joint remover/installer.
Ball joint remover/installer set:
P/N. YM-01474/90890-01474
Ball joint remover/installer
attachment set:
P/N. YM-01477
3 Body
YM-01474
90890-01474
4 Long bolt
YM-01474
90890-01474
5 Short bolt YM-01477
6 Remover washer YM-01477
7 Remover spacer YM-01477
8 Installer attachment YM-01477
9 Installer spacer YM-01477
0 Installer guide YM-01477
●
Install the long bolt 4, installer spacer 9
and installer guide 0 onto the body 3.