Filter
Top Products
6 - 4
CARB
CARBURETOR
DISASSEMBLING THE CARBURETOR
N
OTE:
Before disassembling the carburetor, make
sure to note the number of times the pilot
screw is turned out from the seated position to
its set position.
CHECKING THE CARBURETOR
1.Check:
●
Carburetor body
●
Float chamber
Cracks/damage → Replace.
●
Fuel passage
Contamination → Clean as indicated.
●
Carburetor body
Contamination → Clean.
*****************************************************
Cleaning steps:
●
Wash the carburetor in a petroleum-based
solvent.
(Do not use any caustic carburetor cleaning
solution.)
●
Blow out all of the passages and jets with
compressed air.
*****************************************************
2.Check:
●
Float 1
●
Float tang 2
Damage → Replace.
3.Check:
●
Valve seat 1
●
Needle valve 2
●
O-ring 3
Contamination/wear/damage → Replace as
a set.
N
OTE:
Always replace the needle valve and valve
seat as a set.