Filter
Top Products
4 - 84
ENG
MIDDLE GEAR
Shims are supplied in the following thickness.
*****************************************************
Middle drive pinion gear shim
Thickness (mm)
0.10 0.40
0.15 0.50
0.20 0.60
0.30
INSTALLING THE MIDDLE DRIVEN SHAFT
1.Install:
●
Bearing retainer 1
N
OTE:
Attach the ring nut wrench 2.
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To tighten the
bearing retainer, turn it counterclockwise.
2.Install:
●
Bearing retainer 1
*****************************************************
Installation steps:
●
Attach the folded rag 2.
●
Secure the bearing housing edge in the vise.
●
Attach the bearing retainer wrench 3.
Ring nut wrench:
P/N. YM-38404, 90890-01430
Bearing retainer wrench:
P/N. YM-04128, 90890-04128
LT
T
R
.
.
80 Nm (8.0 m • kg, 58 ft • lb)
LT