Yamaha LIT-11616-16-02 Model Vehicle User Manual


 
9 - 50
+
ELEC
2WD/4WD SELECTING SYSTEM
C0NTINUITY
CORRECT
4.On-command four-wheel drive switch
Refer to CHECKING THE SWITCHES.
*
INCORRECT
Replace the on-command four-wheel drive
switch.
CORRECT
5.Gear motor
Check that the shift fork sliding gear is in
the 2WD position.
Disconnect the gear motor coupler.
Remove the gear motor from the differen-
tial gear case.
Connect the battery (12 V) to the gear
motor terminals.
2WD
4WD:
Battery (+) terminal
Brown/White terminal
1
Battery () terminal
Sky blue terminal
2
4WD
2WD:
Battery (+) terminal
Sky blue terminal
2
Battery () terminal
Blue/Black terminal
3
Make sure that the drive gear (shift fork
sliding gear) operates correctly.
N
OTE:
When installing the differential gear case in
the gear motor, refer to FRONT CONSTANT
VELOCITY JOINTS AND DIFFERENTIAL
GEAR in CHAPTER 7.
*
INCORRECT
Replace the gear motor.