Yamaha DTX502 Musical Toy Instrument User Manual


 
Advanced Techniques
Setting Parameters using Menu Mode
66
DTX502 Owner’s Manual
Pad3 Pad Function
q Trigger input
This item indicates the trigger input source to which a func-
tion is to be assigned. Trigger input sources can be selected
by striking the corresponding pad or zone.
w Func
Pad Function allows control panel operations and the like to
be performed by striking the specified pad or zone. Use this
parameter to select the function to be performed.
TRG1
Trigger Setup
q Trigger setup
Use this parameter to select a trigger setup.
NOTE
Yo u can also select trigger input sources by holding down the
[SHIFT] button and pressing the [<]/[>] buttons.
Settings Description
off Voices will be played in the normal way.
inc kitNo Increase the kit number by 1
dec kitNo Decrease the kit number by 1
inc songNo Increase the song number by 1
dec songNo Decrease the song number by 1
inc clkNo Increase the Click Set by 1
dec clkNo Decrease the Click Set by 1
inc tempo Increase the tempo by 1 BPM
dec tempo Decrease the tempo by 1 BPM
tap tempo Tap a new tempo (page 36)
clkOn/Off Turn the metronome on or off
song>
Start or stop an external song
clk&song>
Turn the metronome on or off and simulta-
neously start or stop an external song (syn-
chronized with the metronome)
doubleBass
Turn the Double Bass Switch on or off (page
61)
NOTE
Pad Function cannot be used when in Training Mode.
>Pad3 snareHd
”Func=off
w
q
06: Trigger Area
Trigger-related settings
Settings
01: DTX522K, 02: DTX532K, 03: DTX542K,
04: DTX562K, 05: DTX500K, 06: DTX520K,
07: DTX530K, 08: DTX540K, 09: DTX550K,
10: DTX560K, 11: DTXP4STD (DTXPRESS
IV STD SET), 12: DTXP4SP (DTXPRESS IV
SP SET), 13: DTXPL (DTXPLORER),
14: DrumTrig, and 15–30: UserTrig
NOTE
The most appropriate trigger setup for your electronic drum kit
will be automatically selected during the Initial Setup process
(page 13). For this reason, it is usually not necessary to change
the setting on this page. However, you may decide to edit trigger
parameters after making detailed changes to the settings of indi-
vidual pads in order, for example, to add another pad or to elimi-
nate crosstalk. In such a case, you should store your settings in
a User trigger setup (numbered 15 to 30) as described below.
>tRG1 ¢¢¢¢¢¢¢¢¢
01:DtX522K ‚
q