Filter
Top Products
Basic Techniques
Customizing the Metronome
34
DTX502 Owner’s Manual
On the CLK2 page, you can set the volumes of individual metronome subdivisions.
1.
Hold down the [SHIFT] button and press the [ ] button
to access the Metronome area.
2.
Navigate to the CLK2 page using the [<]/[>] buttons.
3.
Move the cursor to “ A˘ ”, “ ¤ ”, “ ‹ ”, “ ßß ”, or “ Œ ”
so that you may adjust the volume for that subdivision.
4.
Turn the data dial to adjust the volume of the selected
subdivision.
The volume for each subdivision may be freely adjusted between “0” (silent) and “9”
(loudest). The following shows the timing of the individual metronome subdivisions
when there are four beats per measure.
On the CLK3 page, you can change the sounds for all metronome subdivisions (i.e., “
A˘ ”,
“
¤ ”, “ ‹ ”, “ ßß ”, and “ Œ ”).
1.
Hold down the [SHIFT] button and press the [ ] button
to access the Metronome area.
2.
Navigate to the CLK3 page using the [<]/[>] buttons.
CLK2
Setting Individual Volumes
CLK3
Changing Sounds for All Subdivisions
NOTE
“ A˘ ”, “ á ”, “ ‹ ”, and “ ßß ” subdivi-
sion volumes can be set when the
time signature is set to 3/8, 6/8, 9/8,
12/8, or 15/8.
CLK2* A˘=9 ¤=9
” ‹=0 ßß=0 Œ=0 ‚
A˘
¤
‹
ßß
Œ
CLK3* Sound
”
1:Me
t
ronome ‚