Toshiba 40TL900A Model Vehicle User Manual


 
CONTROLS AND FEATURES
66
Software Upgrade and Licences
Network Upgrade
TOSHIBA may o er upgrades for the TV’s software in the
future. The TV’s software is upgraded via the Network.
Before downloading software:
Con gure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you
will not be able to watch the TV.
a
In the System Setup menu, press
B
or
b
to
select Software Upgrade and press OK.
b
Press
B
or
b
to select Network Upgrade
and press OK.
NOTE: If the network is not available, a
warning message will appear.
c
The TV software upgrade will start when
download succeeds.
Software Licences
The licences for the software used in this television are
available for viewing.
a
In the System Setup menu, press
B
or
b
to
select Software Licences and press OK.
A screen will appear displaying all the
licensing information required for the
televisions software.
System Information and Reset TV
System Information
This feature can be used to check the version of
software currently installed. When in DTV mode,
it includes additional diagnostic information such
as signal strength, signal quality, centre frequency,
modulation, etc.
a
In the System Setup menu, press
B
or
b
to
select System Information.
b
Press OK to display the System
Information.
System Information
2012
6.8.05.1 Jan 19 2012 - 53. 5. 73. 5
MBOOT Version : xxxxxxxx
MFC Version : xxxxxx
WEAK
CH 25
GOOD
CH 33
GOOD
CH 67
GOOD
AVERAGE
STRONG
TOSHIBA
c
For information about the signal quality of a
particular multiplex, press
B
or
b
to select
that multiplex.
d
Press OK for a screen showing detailed
technical information about the selected
multiplex.
Reset TV
Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a
In the System Setup menu, press
B
or
b
to
select Reset TV.
b
Press OK to select. A screen will appear
warning that all settings will be lost. Press
OK to continue.
When the set powers back on, the Quick
Setup screen will appear. Press OK to
advance the setup and perform an auto
tune. (See “Quick Setup” section on page 18.)