Filter
Top Products
CONTROLS AND FEATURES
29
Setting the auto start mode
Controls what the TV does when it detects a 3D signal.
a
Press MENU /
C
c
to highlight Setup icon.
b
Press
B
/
C
c
to highlight Preferences icon
and press OK.
c
Press
B
or
b
to select 3D Setup and press
OK.
Recording Setup
Preferences
REGZA-LINK Setup
Off
Auto
Network Setup
Off
3D Setup
Panel Lock
Teletext
Network Device Setup
Network Lock
d
Press
B
or
b
to select 3D Auto Start.
e
Press
C
or
c
to select 3D, 2D, or O .
Option Description
3D Displays as 3D mode automatically
when 3D format signal is received.
2D Displays as 2D mode automatically
when 3D format signal is received.
O Displays a screen that allows you to
select 3D or 2D when 3D format signal
is received.
Adjusting 2D to 3D Depth
You can adjust the level of 3D.
From the Menu:
a
In the Preferences menu, press
B
or
b
to
select 3D Setup and press OK.
b
Press
B
or
b
to select 2D to 3D Depth and
press OK.
c
Press
C
or
c
to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
e ect.
From the Quick Menu:
a
Press QUICK on the remote to open the
Quick Menu.
b
Press
B
or
b
to select 2D to 3D Depth and
press OK.
c
Press
C
or
c
to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
e ect.
NOTE: Depending on the content, setting the 3D
e ect to a high level may result in blurring of the
image contours and background.
If you experience any abnormal sensation or feel
fatigue or nausea when viewing 3D images, stop
watching and rest until the symptoms subside.
Before viewing again, adjust the 3D e ect to a
lower number and view at a level at which the
symptoms do not occur.
Setting the 3D PIN code
A 3D PIN code is necessary for using 3D Safety
Settings.
To enter a new PIN code:
a
In the Preferences menu, press
B
or
b
to
select 3D Setup and press OK.
b
Press
B
or
b
to select 3D PIN and press OK.
c
Press the number buttons to enter a 4-digit
number. Con rm the code.
NOTE: PIN code cannot be set to “0000”.
To change or delete your PIN code:
a
In the Preferences menu, press
B
or
b
to
select 3D Setup and press OK.
b
Press
B
or
b
to select 3D PIN and press OK.
c
Press the number buttons to enter your
4-digit PIN code.
d
Select Change PIN or Delete PIN and press
OK.
NOTE:
PIN code cannot be set to “0000”.•
If PIN is deleted, 3D Safety Settings is •
grayed out, and the settings are reset to
the factory default.