Filter
Top Products
SETTING UP YOUR TV
21
ATV Manual Tuning
Tuning
The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the
feature if the television cannot be connected to a
media recorder/decoder with a SCART lead or when
you want to tune-in a station on another System.
Use
C
and
c
to move across the screen and select
any of the ATV Manual Tuning options. Then use
B
or
b
to adjust the settings.
ATV Manual Tuning
System
I
A
1
C
2
0
C
V
R
123 4 65 7 8 9
1 Position
The number to be pressed on the remote
control to tune the channel.
2 System
Speci c to certain areas.
3 Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4 Skip
Set Skip to On (
8
) or O (
(
) for the selected
channel. See page 22.
5 Signal Class
The channel classi cation.
6 Channel
The channel number on which a station is being
broadcast.
7 Search
Search up and down for a signal.
8 Manual Fine Tuning
Only used if interference/weak signal is
experienced. See page 73.
9 Station
Station identi cation. Use the
B
b
and
C c
buttons to enter up to seven characters.
To allocate a position on the television for a decoder
and media recorder: turn the decoder on, insert a
pre-recorded lm in the media recorder, press PLAY
and manually tune.
a
In the System Setup menu, press
b
to
select ATV Manual Tuning and press OK.
System Setup
Menu Language
English
Colour System
Location
Quick Setup
ATV Manual Tuning
DTV Settings
Auto Tuning
DTV Manual Tuning
b
Use
B
or
b
to select the desired position.
We suggest Pos. 0 for a media recorder.
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C5
C4
C7
C9
5
C12
C23
C27
Di erent Channel numbers may be displayed.
c
Press OK to select. If the channel chosen for
the media recorder is set to skip, Skip should
be removed before storing.
d
Press
c
to select System and press
B
or
b
to change if required.
ATV Manual Tuning
System
I
A
1
C
2
0
e
Then press
c
to select Search.
f
Press
B
or
b
to begin the search. The search
symbol will ash.
ATV Manual Tuning
Search
I
A
1
C
2
0
g
Each signal will show on the television. If it is
not your media recorder, press
B
or
b
again
to restart the search.
h
When your media recorder signal is found,
press
c
to move along to Station. Use
B
,
b
,
C
and
c
to put in the required characters,
e.g. VCR.
ATV Manual Tuning
Station
I
A
1
C
2
0
C
V
R