Filter
Top Products
CONTROLS AND FEATURES
50
d
Press
B
or
b
to select One Touch Recording
Time.
Recording Setup
TimeShift Size
Start Padding Time None
End Padding Time None
Device Test
Format Device
512 MB
Programme End Time
Select Device
One Touch Recording Time
e
Press
C
or
c
to select the recording time.
You can set the Programme End Time in
30-minute increments in the range of 30
minutes to 360 minutes.
To select the TimeShift Size
a
In the Recording Setup screen, press
B
or
b
to select TimeSift Size.
b
Press
C
or
c
to select 512MB, 1GB, 2GB or
4GB and press OK.
To use TimeShift recording
Time Shift recording allows you to pause live TV
for a xed period of time.
For Example: If you move away from the TV for a
short period, such as when the phone rings while
you are watching TV, you can easily pause live TV
and then continue to view from the same point in
the programme when you return.
a
Press
W
/
w
on the remote control while
viewing the DTV programme.
The screen will switch to a still image and
recor
ding will start automatically.
The recording time is decided by TimeShift
Size. If the TimeShift le size reaches the
limit set, then the TV will continue to be
paused, but the recording bu er will be
reset to the beginning.
b
Press
c
(play).
Catch-up viewing will start from where the
programme was paused.
c
Press
v
(stop) to stop the recording.
To set the padding time for programmed
recording start time and end time
a
In the Recording Setup screen, press
B
or
b
to select Start Padding Time.
b
Press
C
or
c
to select a time.
You can select from None, 3 minutes,
5 minutes, 10 minutes, 15 minutes, 30
minutes, and 45 minutes.
Recording will start at the selected number
of minutes prior to the recording start time.
c
Press
B
or
b
to select End Padding Time.
d
Press
C
or
c
to select a time.
You can select from None, 3 minutes,
5 minutes, 10 minutes, 15 minutes, 30
minutes, and 45 minutes.
Recording will end at the recording end
time plus the selected number of minutes.
To perform a USB HDD operation test
a
In the Recording Setup screen, press
B
or
b
to select Device Test and press OK.
USB HDD operation test will start.
Wait until the test ends.
NOTE: The results of the device test are only a
guide. The device may not function as shown in the
results.
To format a USB HDD
a
In the Recording Setup screen, press
B
or
b
to select Format Device and press OK.
b
Press
C
or
c
to select Ye s in the con rmation
window that will appear and press OK.
Formatting will start. Wait until formatting
ends.
NOTE:
If the USB HDD is separated several partitions by •
PC and multiple Partition appear on the Device
List screen, press
B
or
b
to select the Partition
you want to format.
When the USB HDD (or Partition) is formatted, all •
the data stored on the USB HDD (or Partition) will
be deleted.