Filter
Top Products
CONTROLS AND FEATURES
45
USB HDD Record Function
This function can be used to record and
play digital broadcast programmes. Read
the precautions below before recording or
viewing programmes using the USB HDD
record function.
NOTE:
In order to use this function a USB HDD needs to •
be connected to the TV.
Recorded programmes saved on the USB HDD can •
only be viewed on this TV. They cannot be viewed
when connected to another TV (including the
same model of TV), a PC, or other device.
You cannot watch one channel while recording •
another.
If the recording time to the USB HDD is too short, •
no data may be saved.
You cannot record video input signals on the USB •
HDD.
Not all types of broadcast may be recordable.•
After programming the TV to record digital •
broadcasting, do not disconnect the power plug
before recording starts; failing to do so results in
recording to fail.
Should video or audio recording fail due to •
malfunction of the TV or poor reception, no
compensation shall be paid.
If there is a power failure or the power plug is •
disconnected during programmed recording,
recording will stop and will not resume when the
power returns or the plug is reconnected.
Do not disconnect the power plug when the •
indicator LED is lit.
Any changes implemented by the broadcasting •
station may a ect programme scheduling.
Scheduling of multiple consecutive programmes •
may result in the beginning of each programme
not being recorded.
Accurate start / nish time for recording is reliant •
on broadcasters maintaining correct time stamp if
this not the case the recording will fail.
Some broadcasters can control whether a program •
can be recorded or how long you may be able to
view it for after recording. The on screen message
“Retention limit expired” means that the time limit
for viewing the program has lapsed.
Programmed recording cannot take place if the •
power plug is not connected.
Disconnecting the power plug during recording •
may result in failure to save the recorded
programme.
When the USB HDD is formatted, all the data •
stored on the HDD will be deleted.
Not guaranteed to work with all USB HDD.•
Setting up the USB HDD for recording
To connect an USB HDD (not supplied)
To USB1 or USB2
USB cable
(not supplied)
USB HDD
When you connect a USB HDD to the USB port on
the TV, a prompt will appear.
a
Press
C
or
c
to select No and press OK.
NOTE: Not guaranteed to work with all USB HDD.
To record DTV programmes
(One Touch Recording)
To record the porgramme currently being viewed.
a
Press the
REC button on the remote
control.
The currently viewed programme will start
to be recorded.
The programme indicator (red) will be lit.
To stop recording
a
Press the
v
(stop) button.
A con rmation window “Do you want to
stop Recording?” will appear.
b
Press
C
or
c
to select Ye s and press OK.
Recording will stop.